Lotus Emira

Fuel Contamination Remediation Standards

⚠️ Lotus Emira — Moderate misfuel risk

Emira is petrol-only; adding diesel causes immediate pump/injector risk if cranked.

If the engine was not started

Do not start; Lotus dealer or NZIFDA specialist drainage.

If the engine was started

Inspect HP pump and injectors; full system flush per Lotus guidance.

⚠️ Lotus position — Emira

Lotus workshop manual governs tank and line drainage; contamination is not warranty-covered.

Vehicle information

SpecificationDetails
MakeLotus
ModelEmira
Market statusSold new in New Zealand 2021–present
Body stylesCoupe
GenerationsEmira (2021–present)
EnginesPetrol: 2.0-litre turbo (AMG) or 3.5-litre supercharged V6 Toyota
Fuel tank capacity62 litres (approx.) — consult Lotus service data
Fuel systemDirect-injection petrol; high-performance fuel pump
Access methodMid-engine layout — tank access per Lotus procedure (may require underbody shields removed)
Anti-siphonYes — performance filler design
OEM service portalLotus Service Notes (dealer)

OEM access procedure

  1. Follow Lotus lock-out and workshop lift instructions for mid-engine vehicles.
  2. Depressurise fuel system per service manual before opening lines.
  3. Access tank module as specified — may combine interior and underbody work.
  4. Extract fuel, flush lines if contaminated, replace filters if engine was run.
  5. Leak check before track or road use.

Additional notes

  • Low ride height — use approved lift points only when dropping tank shields.

Related models

Frequently asked questions

Emira diesel by mistake?

Petrol only — do not crank; tow for drainage.

Track day after drainage?

Only after Lotus leak check and clear fuel trims — contamination can linger in lines.

Insurance and misfuel?

Keep NZIFDA invoice and dealer inspection for Motor Insurers Bureau or policy claims.

Need certified fuel contamination service?

Find an NZIFDA certified operator or read consumer guidance on wrong-fuel incidents.

Find an operatorFor consumers